page_banner

news

Now some PC polycarbonate solid sheet users know very little about the pc sheet, so there will be many problems during use, among which the problem of water leakage is one of them. So friends who want to solve water leakage, come and learn today!

 1.The requirements for the polycarbonate solid sheet and the sealant are very strict. Many customers do not understand the situation and apply acid-alkali glass glue, which is incompatible with the polycarbonate solid sheet and causes the sheet to leak; another factor is the application of inferior sealant, because The sealant market is also very complicated. Many customers do not know what sealant is good for sealing, so the sealing performance of solid polycarbonate sheet and beading is not good.

2.The coefficients between the reserved lexan sheets do not match: We know that the important feature of PC solid sheets is thermal expansion and contraction, so it is necessary to reserve space for thermal expansion and contraction between the sheets.

3.Due to its low density and light weight, the solid polycarbonate sheet is easy to transport and install, which is only 1/12-1/15 of that of glass. However, due to its light weight, the sheet deformation caused by wind load or other external forces needs to be considered during installation to avoid deformation or cracking of the polycarbonate solid sheet.

4. At any time, the solid polycarbonate sheet should be installed with the ribs down to help drain the condensed water, otherwise the condensed water will be deposited in the water tank and form green impurities at a special temperature. To avoid moisture build-up and dust contamination in the sink, please pay attention to the sealing of the edge of the solid sheet.

5. Before sealing, make sure that all edges are smooth and blow off the dust in the groove; secondly, the edge sealing tape should completely cover the polycarbonate solid sheet, and the edge sealing tape of the lexan solid sheet should be replaced before installation, because the sealing of the solid polycarbonate sheet Edge tape is only for protection during transportation and storage, not for drainage and installation.

6. Pay attention to standardized sealing methods and provide suitable accessories to achieve a simpler and more suitable installation scheme. Covered sheet mounting accessories include corrosion resistant fasteners, custom gaskets and washers, compatible seals and adhesives, and more.

   Today's introduction is here. After everyone understands it, you can avoid the leakage of polycarbonate solid sheet. I hope it can help everyone!

Company Name: Baoding Xinhai Plastic Sheet Co.,ltd

Contact Person: Sale Manager

Email: admin@cnxhpcsheet.com

Phone: +8617713273609

Country: China

Website: https://www.xhplasticsheet.com/


Post time: Aug-10-2022

Leave Your Message